Frequently Asked Questions
Why do I need a water softener?
A water softener removes harmful minerals from supply water therefore extending the life of plumbing fixtures and appliances. It also helps cut down on soap, shampoo, and detergent costs.
What does a water softener remove?
A water softener removes calcium, magnesium, lime, and iron from supply water. By removing these minerals, you eliminate buildup in pipes, on fixtures, and in your RV water heater.
What are the "On-The-Go" Water Softener dimensions?
This compact unit measures 6 ¾' in diameter by 22" in height. The water softener will soften approximately 300 gallons of water between regenerations depending on water hardness from the supply.
Is the water softener hard to install?
No, quick connects are provided for easy installation and removal.
Is the water softener hard to regenerate?
No, this unit regenerates with just a 1 pound box of table salt. You just shut off the water supply, unhook the outlet side of the water softener, twist off the tank cap, pour in the table salt, put the cap back on, turn on the water supply, and rinse the unit for about 15 minutes. This will complete the regeneration process.
Can the water softener be hooked up backwards?
Yes, but don't worry. The "On-The-Go" Water Softener is manufactured so none of the resin can be lost. Inlets and outlets are conveniently marked for ease in installation.
Why use table salt instead of rock salt?
Table salt dissolves quicker than rock salt therefore it will rinse from the water softener easier and faster.
Will my water taste salty?
No, if the water softener is rinsed properly during regeneration.
Can I get parts for the water softener if needed?
Yes, all parts are available from the manufacturer.
Can the "On-The-Go" Water Softener only be used on an RV? There are many uses for the water softener. It can be used to wash cars, mobile homes, houses, and anywhere soft water is needed.
|
|
