Step A: When water quality diminishes, deionizer needs to be refilled. Shut off water supply and remove tank head.
Step B: Empty resin into a waste container and rinse out tank. Dispose in accordance with federal, state, and local regulations.
Step C: Return distributor tube into the tank and place rubber cap over top of tube. Place funnel into top of the tank.
Step D: Slowly pour or scoop resin into tank. Shake or tap tank to get all of the resin bedded. Tank should be filled to approximately three inches from the top.
Step E: Remove funnel and rubber cap. Replace tank head. Make sure all o-rings are properly seated. Insure seating areas are free from foreign material; apply silicone lubricant to surface of o-rings.
Step F: Turn on water supply. The unit will now produce deionized water.
Hot Products!
Existing
Resellers
Product
Education Center
Company
Information
Dealers! Did you know you can now enter
your purchase orders through your own password protected area on this
site? Stop the Faxing! It's easy! Contact Bruce@PortableWaterSoftener.com
• Press:
Portable Water Deionizer Provides Hundreds of Gallons of Pure Water for
Spot Free Rinsing- Promotion at NASCAR 400 Race. Click Here to Read More
