Facebook
My Cart (0)

Water Softener Accessories

Brass Inlet & Outlet Adapters

Brass Inlet & Outlet Adapters
Click to view larger image

This item has free shipping.

Part Number:OTG-045
Size:3/4 NPT to GHT
Materials:Brass
MSRP:$ 12.95
Discount:$ 10.95
Add To Cart


Pre-Carbon and Salt Dispenser

Pre-Carbon and Salt Dispenser
Click to view larger image

Salt Dispenser: Holds up to four 26oz boxes of common table salt or 6.5lbs of standard softener pellets. Allows you to regenerate the unit without putting it directly in the softener.

Carbon Filter: Perfect for the reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your unit by reducing chlorine and total organic compounds from the water source.

Kit Includes:

  • 1 20" X 2.5" Clear Housing
  • 1 20" X 2.5" Carbon Filter
  • 1 20" X 2.5" Wall Mount Bracket
  • 1 20" X 2.4" Wrench
  • 8 Screws
  • 1 Brass Inlet and Outlet With Cap and Plug
  • 1 Special Distribution Tube
  • 1 Hose

Part Number:OTG-004 Salt Basket
Size:20" X 2.5"
FlowRate:2-3 GPM
Cartridge:10 micron
MSRP:$ 110.00
Discount:$ 89.99
Add To Cart


Replacement Head

Replacement Head
Click to view larger image

Part Number:OTG-038
MSRP:$ 59.95
Discount:$ 49.95
Add To Cart


Hard Water Test Strips

Hard Water Test Strips
Click to view larger image

No matter where you stay in your RV, you’ll will know just how hard the water is with these handy On The Go Hard Water Test Strips! So easy to use! Each kit contains 50 test strips.

Price:$ 15.95
Add To Cart


Pirit Series II Heated Hose 12FT

Pirit Series II Heated Hose 12FT
Click to view larger image

Pirit Heated Hose is used to provide a constant source of water in freezing temperatures. 

  • Cold Weather Water Hose
  • Thermostatically Controlled, turns on when temperatures are below 45° F, off when temperatures are above 50° F
  • Pirit Hose has been tested to -42 degrees F (-41 degrees C )
  • Grounded Power Supply
  • Grounded Nickel Plated Brass Female and Male Coupling
  • Protective Bend Restrictors at both ends
  • Abrasion Resistant Cover
  • Knit Reinforcing
  • Heater wires are extruded directly into the hose walls for uniform heating and unrestricted water flow
  • Certifications: UL listed, MET approved, FDA approved materials
  • One-Year Warranty

Supply Voltage:12' (1/2" inner diameter) 90 watts .75 amps 120 volts 60 hertz
Cord Length:12' Hose
Discount:$ 89.95
Add To Cart


Pirit Series II Heated Hose 25FT

Pirit Series II Heated Hose 25FT
Click to view larger image

Pirit Heated Hose is used to provide a constant source of water in freezing temperatures. 

  • Cold Weather Water Hose
  • Thermostatically Controlled, turns on when temperatures are below 45° F, off when temperatures are above 50° F
  • Pirit Hose has been tested to -42 degrees F (-41 degrees C )
  • Grounded Power Supply
  • Grounded Nickel Plated Brass Female and Male Coupling
  • Protective Bend Restrictors at both ends
  • Abrasion Resistant Cover
  • Knit Reinforcing
  • Heater wires are extruded directly into the hose walls for uniform heating and unrestricted water flow
  • Certifications: UL listed, MET approved, FDA approved materials
  • One-Year Warranty

Supply Voltage:25' (5/8" inner diameter) 180 watts 1.5 amps, 120volts, 60 hertz
Cord Length:25' Hose
Discount:$ 109.95
Add To Cart


Sani-System Water Softener Sanitizer

Sani-System Water Softener Sanitizer
Click to view larger image

Sani-System is the only NSF certified and EPA approved sanitizer for use in water softeners and reverse osmosis units. It is specially designed to kill 99.99% of harmful bacteria and maintain the quality and performance of water treatment systems without chlorine, oxidizers or acids that can harm system equipment, parts and resin. A water Softener should be sanitized every 6 to 12 months.

Check out the product video here: http://www.youtube.com/watch?v=bCHUgwp8ysw

Check out this video for cleaning blue filter housings: https://www.youtube.com/watch?v=tIjr05r1Ggg

After extended periods of nonuse, sanitize unit by 1st - Performing Back Flush, 2nd - Drain water from tank, 3rd - Mix 1/4 of a packet of Sani-System with a gallon of water for the standard model, 1/2 of a packet of Sani-System with 2 gallons of water for the Double Standard Softener, 4th - Pour soulton into tank and let it sit for 60 seconds Max, 5th - turn the water on full and fush the Sani-System out, 6th - Perform Regeneration. 

Part Number:OTG-SS96WS
Design:Pro Products, LLC
Size:.5 oz
Temp Limit:Store in a dry place no lower in temperature than 50ºF or higher than 120ºF
Description:Water Softener Sanitizer
Condition:New
Units:1
Price:$ 6.00
Add To Cart


Back Flush Adapter

Back Flush Adapter
Click to view larger image

Part Number:OTG-032
Description:Back Flush Adapter
Materials:Plastic
Engineered: Softener Back flush adapter
MSRP:$ 3.00
Discount:$ 2.50
Add To Cart


High Flow Shut off Valve

High Flow Shut off Valve
Click to view larger image

Part Number:OTG-024
Size:3/4 in diameter
Description:High Flow Shut off Valve
Materials:Plastic
MSRP:$ 3.00
Discount:$ 2.50
Add To Cart


Adapter Accessory Kit

Adapter Accessory Kit
Click to view larger image

Back Flush, High Flow Shut Off Valve, Inlet Adapter, Outlet Adapter, Outlet Cap, Inlet Plug

Part Number:OTG-035
Description:Adapter Accessory Kit
Materials:Plastic
MSRP:$ 12.95
Discount:$ 8.95
Add To Cart


Double High Flow Shut Off Valve

Double High Flow Shut Off Valve
Click to view larger image

No need to connect or disconnect your On The Go Portable Water Softener during regeneration with our metal double high flow shut off valve.

Part Number:OTG-024A
Size:3/4 in diameter
Description:Double High Flow Shut Off Valve
Materials:Metal
MSRP:$ 12.00
Discount:$ 8.00
Add To Cart


Rope Handle

Rope Handle
Click to view larger image

Free Shipping

Part Number:OTG-009A
MSRP:$ 6.00
Discount:$ 5.50
Add To Cart


High Pressure Drinking Hose

High Pressure Drinking Hose
Click to view larger image

Fresh water, 4', high pressure hose eliminates the need to use the traditional longer hose. Non-toxic drinking water safe, made from FDA-approved materials. The 4' hose allows the user to keep his water softener or water deionizer at arm's length.

Part Number:OTG-013
Size:4ft, 1/2 in diameter
Application:Short hose
Description:High Pressure Drinking Hose
Pressure:160 PSI
Materials:FDA listed materials
Engineered:High pressure soft and deionizer water hook-ups
Condition:Taste-free and non-toxic
MSRP:$ 9.95
Discount:$ 6.95
Add To Cart


Distribution Head and Cap O-Ring

Distribution Head and Cap O-Ring
Click to view larger image

O-ring for the distribution head and cap with a silicone lubricant packet.

Part Number:OTG-031B
MSRP:$ 10.00
Discount:$ 8.50
Add To Cart


The Road Wave-World’s First Built-in RV Pressure Washer

The Road Wave-World’s First Built-in RV Pressure Washer
Click to view larger image

Part Number:OTG-TRW
Size:13″L x 10″W x 23″H
Weight:69 Lbs
Warranty:One year Parts and Labor Warranty
FlowRate:1.9 GPM
Pressure:Adjustable to 1350 (max) PSI
MSRP:$ 1,495.00
Discount:$ 1,295.00
Add To Cart


Pre-Carbon Blk Cartridge Kit - 10" x 2.5"

Pre-Carbon Blk Cartridge Kit - 10" x 2.5"
Click to view larger image

Perfect for reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your deionizer by reducing chlorine and total organic compounds from the water source.

"Ten Micron 10" Carbon Block Made With Coconut Shell Carbon"

Ideal for improving the taste and odor of the water for your RV application and reducing chlorine and total organic compounds to increase the life of your deionizer. Small and compact as well as easy installation!

An ideal, yet inexpensive choice for deionizer or softener pre cartridge requirements: Agricultural, Photographic, Residential and many Industrial manufacturing processes.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located int eh housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. Rated for temperatures to 125 F and pressures to 125 PSI.

The kit comes complete with a 10" housing, 10 micron carbon block cartridges [3 ea], 4' high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket and inlet/outlet hose adapters.

Part Number:#OTG-CARBLK-PRE FILT10-2.5
Design:Polypropylene Housing
Size:10" x 2.5"
FlowRate:2 GPM
Pressure:125 PSI
Details:Call our customer service toll-free at 1-866-482-9614
Kit:Complete Kit
Temperature:125F
Cartridge:Coconut Shell Carbon
MSRP:$ 124.50
Discount:$ 112.05
Add To Cart


Pre-Carbon Blk Cartridge Filters - 10" x 2.5"

Pre-Carbon Blk Cartridge Filters - 10" x 2.5"
Click to view larger image

Perfect for reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your deionizer by reducing chlorine and total organic compounds from the water source.

"Ten Micron 10" Carbon Block Made with Coconut Shell Carbon"

These are ideal for improving the taste and odor of water for your RV application as well as reducing chlorine and total organic compounds that will protect/increase the life of your deionizer.

Very inexpensive choice for application with your deionizer or softener to achieve pre cartridge requirements in all applications, including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.
 

EASY CHANGEOUT!

Part Number:#OTG-CGAC10-2.5
Design:Polypropylene
Size:Standard 10" Housing-Ridge Cap
Weight:3 lbs
FlowRate:2 GPM
Details:Call our customer service toll-free at 1-866-482-9614
Temperature:125F
Cartridge:Coconut Shell Carbon
Units:6 units per package
MSRP:$ 86.14
Discount:$ 77.55
Add To Cart


Post-Sediment Cartridge Kit 10" X 2.5"

Post-Sediment Cartridge Kit 10" X 2.5"
Click to view larger image

Perfect to control residual solid by adding...

"Five Micron 10" Graded Density Melt
Blown Polypropylene Filter"

The standard 10" five micron post-sediment filter kit...

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow and 9 7/8" X 2 1/2" OD in size.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located in the housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. The unit is rated for temperatures to 125 F and 125 PSI.

The kit comes complete with a 10" housing, 5 micron sediment cartridges [3 ea], 4’ high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket, and inlet/outlet hose adapters.

Part Number:OTG-CSEDI-POSTFILT
FlowRate:3-4 Max Flow Rate
MSRP:$ 85.75
Discount:$ 77.25
Add To Cart


Post-Sediment Cartridge Filters 10"X 2.5"

Post-Sediment Cartridge Filters 10"X 2.5"
Click to view larger image

Perfect to control residual solids by adding...

"Five Micron 10" Graded Density Melt
Blown Polypropylene Filter"

The standard 10" five micron post-sediment filter kit...

Can be added to either your deionizer or softener...

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow and 9 7/8" X 2 1/2" OD in size.

Part Number:OTG-CSC-5
FlowRate:3-4 Max Flow Rate
MSRP:$ 27.00
Discount:$ 24.30
Add To Cart


Post-Sediment Cartridge Kit - 20" x 2.5"

Post-Sediment Cartridge Kit - 20" x 2.5"
Click to view larger image

Perfect to control residual solid by adding...

Five Micron 20" Graded Density Melt Blown Polypropylene Filter"

The standard 20" 5 micron post-sediment filter kit...

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow rate.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located in the housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. The unit is rated for temperatures to 125 F and 125 PSI.

The kit comes complete with a 20" housing, 20 micron sediment cartridges [3 ea], 4' high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket, and inlet/outlet hose adapters.

Part Number:OTG-CSEDI-20X2.5
Design:Polypropylene Housing
FlowRate:3-4 GPM max flow
Pressure:125 PSI
Details:Call our customer service toll-free at 1-866-482-9614
Kit:Complete Kit
Temperature:125F
Cartridge:Durable Spun Polypropylene Cord
MSRP:$ 317.00
Discount:$ 285.00
Add To Cart


Post-Sediment Cartridge Filters - 20" x 2.5"

Post-Sediment Cartridge Filters - 20" x 2.5"
Click to view larger image

Perfect to control residual solids by adding...

Five Micron 20" Graded Density Melt Blown Polypropylene Filter"

The standard 20" 5 micron post-sediment filter kit... 

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow rate.

Part Number:OTG-CSC20-5
Design:Polypropylene
Size:Standard 20" Housing-Ridge Cap
Weight:3 lbs
FlowRate:3-4 GPM max flow
Details:Call our customer service toll-free at 1-866-482-9614
Temperature:125F
Cartridge:Gradient Density Melt Brown
Units:6
MSRP:$ 282.45
Discount:$ 254.21
Add To Cart